Ionothermal Synthesis of Sulfidobismuth spiro-Dicubane Cations

Bi₂S₃ was dissolved in the presence of NaCl in the ionic liquid [BMIm]Cl ⋅ 4AlCl₃ (BMIm=1-n-butyl-3-methylimidazolium) through annealing the mixture at 180 °C. Upon cooling to room temperature, orange, air-sensitive crystals of Na(Bi₇S₈)[S(AlCl₃)₃]₂[AlCl₄]₂ ( 1 ) precipitated. X-ray diffraction on single-crystals of 1 revealed a triclinic crystal structure that contains (Bi₇S₈)⁵⁺ spiro-dicubanes, [S(AlCl₃)₃]²⁻ tetrahedra triples, isolated [AlCl₄]⁻ tetrahedra, and sodium cations.     

pH值对Bi2MoO6晶体形貌和可见光催化性能的影响

以(NH₄)₆Mo₇O₂₄·4H₂O和Bi(NO₃)₃·5H₂O为原料,采用普通水热法制备Bi₂MoO₆光催化剂,研究pH值对制备该光催化剂的影响.对所制备的系列样品,采用X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、比表面积分析仪、X射线光电子能谱仪(XPS)和紫外-可见漫反射(UV-Vis DRS)进行表征.结果表明:pH值对Bi₂MoO₆晶体的物相组成、形貌和光催化性能均有显著影响.pH值为1~7时,所制备的样品为纯相Bi₂MoO₆,pH值为9或11时,出现第二相Bi_3.64Mo_0.36O_6.55;随着pH值的升高,形貌依次为纳米棒、纳米片和无规则纳米颗粒.在可见光(λ≥420 nm)照射下,通过光催化降解罗丹明B(Rhodamine B,RhB),探讨了制备Bi₂MoO₆的pH值对其可见光催化活性的影响.当pH=7时,制备的样品光催化效果最好,光照50 min后对初始浓度为5 mg·L^-1的罗丹明B溶液的降解率为85%.     

Synthesis and Characterisation of Bismuth(III) Aminoarenesulfonate Complexes and Their Powerful Bactericidal Activity against Helicobacter pylori

The synthesis and characterisation of nine new tris‐substituted bismuth(III) aminoarenesulfonates of the general formula [Bi(O₃S‐R^N)₃] (R^N=o‐aminophenyl 1 , m‐aminophenyl 2 , 6‐amino‐3‐methoxyphenyl 3 , p‐aminophenyl 4 , 2‐pyridyl 5 , o‐aminonaphthyl 6 , 5‐aminonaphthyl 7 , 4‐amino‐3‐hydroxynaphthyl 8 and 5‐isoquinolinyl 9 ) is described. Two synthetic strategies, using Ag₂O and [Bi(OtBu)₃], were explored and compared. The possibility to access heteroleptic bismuth(III) complexes with the new silver(I) metathesis reaction is demonstrated with the synthesis of the heteroleptic bismuth(III) aminoarenesulfonate complexes [PhBi(O₃S‐P2)₂(dmso)] 10 , [Ph₂Bi(O₃S‐P2)]_∞ 11 and [PhBi(O₃S‐P2)₂]_∞ 12 , of which the solid state structures 10 and 12 are presented (2P‐SO₃^?=2‐pyridinesulfonate). These complexes offer remarkable in‐vitro activity against three standard laboratory strains of Helicobacter pylori (H. pylori) as demonstrated by their exceptionally low minimum inhibitory concentration (MIC) values of 0.049 μg mL^?1 for the strains 251 and B128, which places most MIC values in the nano‐molar region. These results demonstrate the importance of the amino functionality in addition to the sulfonate group on the bactericidal properties against H. pylori.     

Facile Synthesis and Thermoelectric Properties of Self‐assembled Bi2Te3 One‐Dimensional Nanorod Bundles

Self‐assembled Bi₂Te₃ one‐dimensional nanorod bundles have been fabricated by a low‐cost and facile solvothermal method with ethylene diamine tetraacetic acid as an additive. The phase structures and morphologies of the samples were characterized by X‐ray diffraction, scanning electron microscopy, Fourier‐transform infrared spectrometry, and transmission electron microscope measurements. The growth mechanisms have been proposed based on the experimental results. The full thermoelectric properties of the nanorod bundles have been characterized and show a large improvement in the thermal conductivity attributed to phonon scattering of the nanostructures and then enhance the thermoelectric figure of merit. This work is promising for the realization of new types of highly efficient thermoelectric semiconductors by this method.     

Bismuth Tri‐ and Tetraarylcarboxylates: Crystal Structures,In Situ X‐ray Diffraction,Intermediates and Luminescence

A systematic investigation of the systems Bi³⁺/carboxylic acid/HNO₃ for the tri‐ and tetracarboxylic acids pyromellitic acid (H₄Pyr), trimellitic acid (H₃Tri) and trimesic acid (H₃BTC) acid led to the discovery of five new bismuth carboxylates. Structural characterisation allowed the influence of the linker geometry and the Bi³⁺:linker molar ratio in the starting solution on the crystal structure to be determined. The crystallisation of three selected compounds was investigated by in situ energy‐dispersive X‐ray diffraction. Three new crystalline intermediates were observed within minutes, and two of them could be isolated by quenching of the reaction mixture. Their crystal structures were determined from laboratory and synchrotron X‐ray powder diffraction data and allowed a possible reaction pathway to be established. In depth characterisation of the luminescence properties of the three bismuth pyromellate compounds was carried out. Fluorescence and phosphorescence could be assigned to (mainly) ligand‐ and metal‐based transitions. The polymorphs of Bi(HPyr) exhibit different luminescence properties, although their structures are very similar. Surprisingly, doping of the three host structures with Eu³⁺ and Tb³⁺ ions was only successful for one of the polymorphs.     

锡掺杂Bi2O3可见光响应光催化剂的制备及性能

以硝酸铋和四氯化锡为原料,采用浸渍法制备了纯Bi2O3和Sn掺杂Bi2O3光催化剂。利用X射线光电子能谱、X射线荧光光谱、X射线衍射、扫描电子显微镜、紫外-可见吸收光谱和光致发光光谱对样品进行了表征。在可见光下,利用2,4-二氯苯酚水溶液的光催化降解作为探针反应,考察了样品的可见光催化活性。结果表明,浸渍法能较好地实现Sn的掺杂,催化剂中掺杂剂Sn的价态为+4价,以锡的氧化物形式存在于Bi2O3晶格间隙或晶粒表面。并且掺杂适量的Sn,可有效抑制Bi2O3晶相由四方相向单斜相的转变,拓宽了Bi2O3的可见光响应范围,有效阻止了光生电子和空穴的复合,从而提高了Bi2O3的可见光催化活性。当Sn的掺杂量为2%时(物质的量的分数),Bi2O3具有最好的可见光催化活性。     

LiBa0.95-yBO3:0.05Tb3+,yBi3+荧光粉的制备及荧光性质

以硼酸和碳酸盐为原料,用高温固相法制备了可被（近）紫外光（369、254 nm）有效激发的Tb³⁺单掺杂LiBa_1-xBO₃：xTb³⁺（物质的量分数x=0.02、0.03、0.04、0.05、0.06、0.07）及Bi³⁺和Tb³⁺共掺杂LiBa_0.95-yBO₃：0.05Tb³⁺,yBi³⁺（物质的量分数y=0.02、0.03、0.04、0.05、0.06、0.07）的2个系列荧光粉,产物的结构和形貌分别用粉末X射线衍射（PXRD）和扫描电子显微镜进行表征。PXRD测定结果表明2个系列的产物均为纯相LiBaBO₃。通过对第一系列产物荧光光谱的测定,筛选出发光强度最好的产物,据此确定铽离子的最佳掺杂量;在此基础上制备出铋离子掺杂量不同的第二系列荧光粉。荧光光谱测定的实验结果表明,Tb³⁺/Bi³⁺共掺杂的荧光粉的发光强度好于Tb³⁺单掺杂的荧光粉,这说明Bi³⁺对Tb³⁺有敏化作用;而且随着Bi³⁺掺杂量的增加,产物的荧光强度表现出先增加后减小的趋势,当Bi³⁺的掺杂量y=0.03时,产物的荧光强度达到最大。Bi³⁺和Tb³⁺之间存在偶极-四极相互作用而进行能量传递。系列荧光粉的CIE坐标显示其发光颜色在一定程度上呈现出由绿色光到白光的渐变趋势。     

层状、花形和棒状钛酸铋纳米结构的可控合成及光催化性能

通过可控水热法,制备出层状、花形和棒状钛酸铋(Bi4Ti3O12,BIT)纳米结构。通过X射线衍射(XRD)和场发射扫描电子显微镜(FESEM)观测其结构和形貌特征。XRD图显示,所制备的样品为层状钙钛矿结构。FESEM结果表明,通过控制水热过程的反应参数可以得到不同形貌的纳米粉体。紫外-可见漫反射光谱(UV-Vis DRS)表明BIT样品的带隙能约为2.63～2.95 eV。利用可见光(λ>420 nm)照射下的甲基橙降解实验评价了BIT样品的光催化性能。结果表明,BIT的光催化活性比掺氮TiO2(N-TiO2)高得多。所制备的层状BIT纳米结构光催化效率最高,经可见光照射360 min,甲基橙溶液的降解率可达95.0%。同时还研究了结构和形貌对不同条件下制备的BIT样品光催化活性的影响。     

Iron‐ and Bismuth‐Catalyzed Asymmetric Mukaiyama Aldol Reactions in Aqueous Media

We have developed asymmetric Mukaiyama aldol reactions of silicon enolates with aldehydes catalyzed by chiral Fe^II and Bi^III complexes. Although previous reactions often required relatively harsh conditions, such as strictly anhydrous conditions, very low temperatures (?78 °C), etc., the reactions reported herein proceeded in the presence of water at 0 °C. To find appropriate chiral water‐compatible Lewis acids for the Mukaiyama aldol reaction, many Lewis acids were screened in combination with chiral bipyridine L1 , which had previously been found to be a suitable chiral ligand in aqueous media. Three types of chiral catalysts that consisted of a Fe^II or Bi^III metal salt, a chiral ligand ( L1 ), and an additive have been discovered and a wide variety of substrates (silicon enolates and aldehydes) reacted to afford the desired aldol products in high yields with high diastereo‐ and enantioselectivities through an appropriate selection of one of the three catalytic systems. Mechanistic studies elucidated the coordination environments around the Fe^II and Bi^III centers and the effect of additives on the chiral catalysis. Notably, both Brønsted acids and bases worked as efficient additives in the Fe^II‐catalyzed reactions. The assumed catalytic cycle and transition states indicated important roles of water in these efficient asymmetric Mukaiyama aldol reactions in aqueous media with the broadly applicable and versatile catalytic systems.